ADC018 Control Panel Overview

	Lights up when the mute function is on, and turns off when mute is off.
	Lights up when Sleep Mode is activated, and turns off when exiting Sleep Mode.
	Lights up when Continuous Mode is activated, and turns off when exiting Continuous Dehumidification.
	Lights up when Auto Mode is activated, and turns off when exiting Auto Dehumidification.
	Child Lock The display shows LOC.
	The filter dirty indicator lights up blue every 1000 hours of use, indicating that the filter needs to be cleaned. Press and hold the for 3 seconds to turn off the indicator and reset the timer.
	The "75" on the left indicates humidity, and the "65" on the right indicates temperature.
	Displays when ambient RH is below 30%.
	Displays when ambient RH is above 90%.
	Shows current timer in Timer Setting mode.
	Lights up when showing Celsius.
	Lights up when displaying Fahrenheit (factory default).
	Displays L1–L3, indicating fan speed levels.
	Lights up during timer setting or when the timer is set; turns off when Timer mode is exited.
	When the dehumidifier water tank is full or the tank is not properly placed on the unit, the digital display shows "FULL"
	Power Button Press once to turn the unit ON or OFF. The dehumidifier features an Auto-Resume function. It will automatically restart with the previous settings after a power outage or when it is turned back on.
	Timer Button Press once to enter the Timer ON/OFF setting mode. In Timer mode, press the "+" or "–" button to adjust the timer in 1-hour steps, cycling from 0 to 24 hours. Press and hold the "+" or "–" button for 1 second to enter Quick-Adjust mode for continuous adjustment.
	Mute Button Press once to enable or disable the beep sound. When muted, all button tones and alert beeps are turned off, and the Mute icon lights up on the display.
	Light Button Press once to cycle through lighting modes: Default – Screen on, ambient light on → Screen off, ambient light on → All lights off → Return to default. Humidity indicator: ●Blue: below 40% RH ●Green: 40%–60% RH ●Orange: above 60% RH
	Child Lock Button While the unit is ON, press and hold both the "Light" and "Mute" buttons for 3 seconds to activate or deactivate the Child Lock function. When activated, the display shows LOC for 3 seconds, then returns to humidity/temperature display. While locked, buttons are disabled (beep sounds remain), and pressing any button causes LOC to flash 3 times.
	Temperature Unit Button (°C / °F) While the unit is ON, press and hold both the "+" and "–" buttons for 3 seconds to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
	Fan Speed Button Press the Fan Speed button to cycle through fan speeds: L1 → L2 → L3 . In Continuous or Auto Mode: Pressing the Fan Speed button allows you to adjust the fan speed. Short Press: Adjust the fan speed Long Press: Reset the filter life Remark: In Sleep Mode: Fan speed cannot be adjusted. When the filter life indicator lights up, clean the filter and press and hold the Fan Speed button for 3 seconds to reset the filter life.
	Mode Button Press the Mode button to cycle through operating modes: Continuous → Auto → Sleep. ① Continuous Mode The unit dehumidifies continuously. In this mode, fan speed can be adjusted. ② Auto Mode In Auto mode, set the target room humidity you prefer (default: 60% RH). The unit will stop automatically when the ambient humidity reaches the target. If the ambient humidity rises above the set value, the unit will restart automatically. Fan speed can be adjusted in Auto Mode. ③ Sleep Mode In Sleep mode, the unit operates at L1 fan speed and all lights off. In Sleep mode, press "+" or "–" to adjust the Auto humidity setting and lock the fan at L1，all lights will be off if no any operation in 5s.